using electrolysis to extract gold

using electrolysis to extract gold

  • Gold Electrolysis Process & Gold Recovery

    Its very is easy and efficient. We can use the process to apply in gold attraction from metal. Separate gold pin out of the connector. Chemical Gold Solvent Extraction. Ratio chemical. Sodium cyanide NaCN or Potassium cyanide KCN 30grams. GOLD STRIPPER SG9 30grams. Distilled water 2 liter.

    Live Chat
  • Newbie trying to reclaim gold with Electrolysis Gold

    Nordis2010 if you didn't get the information you have from here then its probably inaccurate. first of all reverse electroplating (electrolysis) only works on gold plate over a base metal.this will not work on printed circuit boards (at least for the beginner) it takes modified equipment and is hard to master. a better method for reclaiming gold from PCB's is the AP method. many

    Live Chat
  • Extraction of Gold by Electrolysis.how? Yahoo Answers

    Source(s) The material that you want to separate the gold from is the cathode a piece of the pure metal would be the anode. A 1/10 ounce or less piece of gold would do very well since it can be beaten very thin to be the anode. A Gold Chloride or other gold based electrolyte would be the medium of transfer.

    Live Chat
  • How to use an Electrolytic method to separate fine gold

    If it's a chemistry problem then you would first have to dissolve the gold. I think cyanide solutions are used to leach gold out of gold ore but that's nasty stuff. So I'd look up Aqua Regia (some mix of nitric and hydrochloric acid) and dissolve the gold with that. Depending on what garbage was in the sand you could then electroplate the gold out.

    Live Chat